Tips for Replacing 2019 BMW S1000RR Fairings with Ease

Replacing 2019 BMW S1000RR fairings is not hard. With proper tools and some planning, it’s easy to do. Fix broken panels or give your bike a new look. Changing fairings improves both the style and performance of your bike.

Key Takeaways

• Get tools like screwdrivers and a plastic trim tool first. Being ready helps make replacing the fairings easier and faster.

• Check and clean the mounting spots well before adding new fairings. Clean spots help them fit better and last longer.

• Pick good-quality fairings that match your bike exactly. This avoids fitting problems and makes your bike look and work better.

Tools and Preparation for Replacing Fairings

Tools You’ll Need for Motorcycle Fairings

Get the right tools before starting. The correct tools make replacing fairings simple. You’ll need screwdrivers, Allen wrenches, and a socket wrench. These tools help remove and tighten bolts holding the fairings. A plastic trim tool is useful too. It stops scratches while you work.

Don’t forget a soft cloth and cleaning spray. Use these to clean mounting spots before adding new fairings. For custom fairings, a heat gun can help them fit better. Keep tools close by to save time and avoid stress.

Setting Up Your Workspace for Fairing Replacement

Keep your workspace clean and neat. Pick a flat, bright spot to lay out your fairings. Use a soft mat or blanket to stop scratches on the panels. Make sure your bike is steady with a paddock or center stand.

Good lighting is very helpful. It lets you see small things like bolt holes and alignment spots. Use a container for screws and bolts. This keeps small parts from getting lost.

Checking 2019 BMW S1000RR Fairings Before Installing

Look over your new fairings before putting them on. Check for cracks, scratches, or other problems. Ensure all mounting points are in good shape. If using aftermarket fairings, make sure they fit your bike.

Also, check the mounting points on your bike. Clean them well for a secure fit. This step makes your fairings look better and last longer.

Step-by-Step Guide to Replacing 2019 BMW S1000RR Fairings

Removing the Old Fairings

Taking off the old motorcycle fairings is the first step. Start with the lower fairing. Use an Allen key to remove the two hex bolts on each side. Once the bolts are out, push the fairings toward the back of the bike to slide them off. Next, move to the main fairings. Use a Phillips head screwdriver to remove the plastic rivets holding the nose cone cover. This will give you access to the screws and bolts securing the main fairings. Carefully remove these fixings and set them aside.

For the nose cone, undo all the bolts holding the windscreen in place. Remove the mirrors and disconnect the speedometer. Then, gently pull the nose cone away from the bike. If your bike has a tail unit, start by removing the rider and pillion seats. Take off the seat strap and the bolts on the rear seat panel. Unplug the indicators and rear lights before sliding the tail unit off. Finally, remove the rear hugger and front fender by undoing their respective bolts and sliding them out. Keep all screws and bolts in a container to avoid losing them.

Cleaning and Inspecting Mounting Points

Before installing new motorcycle fairings, clean the mounting points thoroughly. Use a soft cloth and a cleaning spray to remove dirt, grease, or debris. This ensures a secure fit for the new panels. While cleaning, inspect the mounting points for any damage. Look for cracks, rust, or bent areas that could affect the installation. If you find any issues, fix them before moving forward. A clean and well-maintained mounting area not only helps the fairings fit better but also improves their durability.

Installing New Motorcycle Fairings

Now it’s time to install the new fairings. Start with the front fender. Slide it between the forks and secure it with the six bolts you removed earlier. Next, attach the rear hugger by sliding it into place and tightening the hex bolts. For the tail unit, reconnect the indicators and rear lights before securing the seat panel with its bolts. Replace the seat strap and reinstall the rider and pillion seats.

When installing the nose cone, reconnect the speedometer and attach the mirrors. Secure the windscreen with its bolts. Then, move on to the main fairings. Align them with the mounting points and use the screws and bolts to secure them. Finally, attach the lower fairing by sliding it into place and tightening the hex bolts. Make sure each panel is properly aligned before tightening the bolts completely.

Adjusting and Securing Fairings for a Perfect Fit

Once all the panels are in place, take a moment to adjust them for a perfect fit. Check the alignment of each fairing with the bike’s frame. Look for gaps or misaligned edges. If you notice any issues, loosen the bolts slightly and adjust the panel until it fits correctly. Tighten the bolts once you’re satisfied with the alignment.

Pay special attention to areas where the fairings meet other components, like the side stands or cables. Make sure there’s no interference that could affect the bike’s performance. If you’re planning to take your bike to the track or use it for a race, double-check that all panels are secure. Loose or misaligned fairings can create drag and impact your bike’s aerodynamics. A snug and secure fit ensures your motorcycle looks great and performs at its best.

Ensuring Compatibility with 2019 BMW S1000RR Components

Checking Fit with Side Stands and Other Parts

When installing new fairings, you need to make sure they fit perfectly with your bike’s existing components. Start by checking how the panels align with the side stands. Misaligned fairings can interfere with the stand’s movement, making it hard to park your bike securely. To avoid this, test the stand after attaching the lower fairings. If it doesn’t move freely, adjust the panel until it does.

Other parts, like the exhaust and footpegs, also need attention. Look closely at how the fairings sit around these areas. A snug fit is essential to prevent rattling or damage while riding. If you’re using aftermarket fairings that fit differently, you might need to make small adjustments. Don’t rush this step—it’s worth taking the time to get everything just right.

Avoiding Interference with Cables and Wiring

Cables and wiring are another area where compatibility issues can pop up. Before securing the panels, check that no wires are pinched or stretched. Pay special attention to the areas around the handlebars and the front fairing. Tight cables can affect your bike’s controls, which is the last thing you want on the road or track.

To keep things neat, use zip ties to bundle loose wires. This not only prevents interference but also gives your bike a cleaner look. If you notice any cables rubbing against the fairings, add a small piece of foam or rubber as a cushion. These simple steps can save you from bigger problems down the line.

Tips for Preventing Compatibility Issues

Preventing compatibility issues starts with choosing the right fairings. Always go for fairings that fit your 2019 BMW S1000RR perfectly. High-quality kits, like those made with injection molding technology, are designed for a precise fit. They’re less likely to cause problems with your bike’s components.

Before installation, lay out all the panels and compare them to your old ones. This helps you spot any differences early. If you’re planning to take your bike to the track or use it for a race, double-check everything. Even small misalignments can affect your bike’s performance at high speeds.

Finally, keep a few basic tools handy during the installation. A heat gun can help you adjust the shape of custom fairings for a better fit. And don’t forget to test your bike after installation. Take it for a short ride to ensure everything works smoothly. These precautions will help you enjoy your new fairings without any headaches.

Recommended Fairing Brands and Customization Options

Why Nicefairings is Great for 2019 BMW S1000RR Fairings

If you need reliable fairings, Nicefairings is a great choice. Their kits are made with strong ABS plastic and precise molding. This ensures they fit your 2019 BMW S1000RR perfectly. You won’t need to make extra changes or worry about bad fits.

Nicefairings also focuses on making fairings durable and fast. They are lightweight and reduce wind drag, helping your bike go faster. Whether you’re racing or riding on the road, these fairings add style and performance. Plus, they are easy to install, saving you time and effort.

Features of Top-Quality Motorcycle Fairings

Good motorcycle fairings have advanced features that make them special. Here’s a table showing some key tests and benefits:

These features ensure your fairings look good and work well in all conditions.

Customization Options for a Unique Style

Customizing fairings is a fun way to make your bike unique. Many riders love sleek designs and bold colors. You can choose a carbon-fiber look or bright shades to match your style.

Motorcycle clubs also use custom fairings to show their identity. You can pick designs ready for custom paint or add decals and logos. A shiny mirror finish can make your bike look professional. With so many choices, you can create a one-of-a-kind design for your ride.

Solving Common Challenges During Fairing Replacement

Fixing Problems with New Fairings Fitting

It’s normal to face fitting problems with new fairings. If panels don’t align or there are gaps, stay calm. Loosen the bolts a little to adjust the panels. Once they fit well, tighten the bolts again.

Aftermarket fairings might not fit perfectly at first. A heat gun can help fix this. Warm the edges gently to make them flexible. This lets you reshape them for a better fit. Be careful not to overheat the material. Taking your time here ensures your bike looks smooth and ready to ride.

Making Adjustments for Better Fit

Sometimes, small changes are needed to make fairings fit better. If panels touch the exhaust or footpegs, use sandpaper or a file to trim them. Test the fit after each small adjustment to avoid cutting too much.

For racing bikes, check that fairings don’t block important parts like cables or side stands. Adding foam or rubber spacers can stop rubbing or rattling. These small fixes improve both the look and safety of your bike.

Securing Loose or Misaligned Panels

Loose or crooked panels can make your bike look bad and affect its performance. Check all bolts and mounting points to ensure they’re tight. Don’t overtighten, as this can crack the fairings.

If panels still don’t fit right, clean the mounting spots. Dirt or uneven surfaces can cause problems. For stubborn gaps, use washers to fill the space. A snug fit makes your bike look better and helps it perform well on the road or track.

Changing the fairings on your 2019 BMW S1000RR is simple. With good planning and top-notch parts, it’s easy to get great results. Many riders find that using strong, well-made fairings makes the job quicker and ensures they fit perfectly. Don’t delay—upgrade your bike with Nicefairings now and enjoy a better ride!

Upgrade Your BMW S1000RR

Explore our premium fairing kits designed for your 2019-2023 BMW S1000RR and enhance both style and performance.

Shop Now

FAQ

How much time is needed to replace 2019 BMW S1000RR fairings?

It takes about 2-3 hours. This depends on how prepared you are. Using the right tools and keeping your workspace tidy can make it faster.

Can I put on aftermarket fairings by myself?

Yes, you can! Most aftermarket fairings, like Nicefairings, are simple to install. Just follow the steps carefully, and they’ll fit perfectly.

Tip: Arrange all parts before starting. This helps you find missing pieces and makes the process easier.

Do custom fairings require changes to my bike?

Not often. Good-quality custom fairings, like injection-molded ones, usually fit perfectly. If changes are needed, they’re small and easy to do with basic tools.

See Also

Selecting Budget-Friendly Motorcycle Fairings For Your Ride

Essential Safety Guidelines For Riders Using Motorcycle Fairings

Ways To Safeguard Your Motorcycle Fairings From Damage