When you look at the 2007cbr1000rr and the 2006 model, you may wonder if the fairings fit both bikes. The answer is yes, the fairings are mostly compatible. Both models share the same engine, frame, and performance features. You can see the technical similarities in the table below:
Feature | 2006 Model | 2007cbr1000rr |
---|---|---|
Engine | 998cc, inline four | Same as 2006 |
Power | 172 hp | Same as 2006 |
Frame | Aluminum twin-spar | Same as 2006 |
Notable Differences | - | New colors, black swingarm |
If you plan a 07 fairing swap, check the mounting points before you start the swap. This step helps you avoid problems during installation.
When you compare the engines of the 2006 and 2007 models, you will notice that Honda made most of the big changes in 2006. The 2007cbr1000rr keeps the same engine setup as the 2006 version. You get the same power and torque, so you will not feel a difference in speed or acceleration between the two years. Here is a table that shows the main engine specifications:
Specification | 2006 Model | 2007 Model |
---|---|---|
Horsepower | 178 ch (175.50 hp) at 11,250 rpm | 178 ch (175.50 hp) at 11,250 rpm |
Torque | 11 mkg at 10,000 rpm | 11 mkg at 10,000 rpm |
Compression Ratio | 12.2:1 | 12.2:1 |
Cam Timing | Revised for 2006 | Same as 2006 |
Intake Valve Lift | 9.1 mm | 9.1 mm |
Intake Valve Springs | Double springs | Double springs |
Honda increased the compression ratio and changed the cam timing in 2006. The company also improved the intake and exhaust porting, and made the engine rev higher. In 2007, Honda did not change these features. You get the same engine performance in both years.
Tip: If you want a motorcycle with the latest engine upgrades, you will find that both the 2006 and 2007cbr1000rr give you the same strong performance.
You will see that the chassis and suspension parts are almost the same for both years. Honda redesigned the rear shock and added the HRC rear link in 2006. This new rear link is about 1/4 inch longer than the one used in older models. The longer link helps the bike handle better and gives you more stability, especially when you ride alone. The 2007cbr1000rr keeps this same setup. You do not get any new suspension parts in 2007.
You can expect the same smooth ride and handling from both the 2006 and 2007 models.
The biggest new feature in the 2007cbr1000rr is the Honda Electronic Steering Damper (HESD). This system helps you control the bike better at different speeds. The HESD uses sensors to check how fast you are going and how quickly you accelerate. At low speeds, the steering feels light and easy. When you go faster, the damper makes the steering heavier to keep the bike stable. The 2006 model does not have this electronic damper.
You will not find big changes in the instrument cluster or other electronics between these two years. Most of the big updates to the dashboard and onboard systems came in later models. For 2006 and 2007, the main difference is the new electronic steering damper in the 2007cbr1000rr.
When you look at the 2006 and 2007 Honda CBR1000RR, you might expect big changes in how the bikes look. In reality, the two models share almost the same bodywork. Honda introduced a new front fairing design in 2006. The 2007 model kept this design with only small updates. You will not see major changes in the shape or size of the fairings between these two years.
If you want to spot the differences, focus on the paint and graphics. Honda gave the 2007cbr1000rr more color options than the 2006 version. You could choose from new bodywork colors like Black with Metallic Gray or Light Silver Metallic with Red and Black. The 2007 model also featured a black-painted rear swingarm. This detail made the motorcycle look more aggressive and modern.
Tip: If you want your bike to stand out, look for a 2007 model with the black swingarm and new color schemes. These small changes can make your motorcycle look unique, even if the fairings themselves have not changed much.
You can see that Honda focused on style and color for 2007. The fairing shape stayed the same, but the new paint and graphics gave the bike a fresh look. When you compare both years side by side, you will notice that the 2007 model looks more aggressive and modern, even though the main bodywork did not change.
When you look at the 07 fairing swap, you want to know if the fairings from the 2007 model will fit your 2006 bike. You can feel confident because the main mounting points on both models match up. Many companies sell fairing kits that fit both years. These kits group the 2006 and 2007 models together, which shows that the design is shared. You do not need to worry about the fairing holes lining up. The mounting points on your 2006 bike will accept the 2007 fairings without trouble. This makes the swap process much easier for you.
Note: The product listings do not always say the mounting points are exactly the same, but they do show that the fairings fit both models. You can trust that the fitment is compatible for your 07 fairing swap.
You might wonder if you need to make changes to your bike for the 07 fairing swap. The good news is that you do not need to modify your 2006 cbr1000rr to use 2007 fairings. The fairing design and mounting points did not change between these two years. Most fairing kits for these models do not mention any special steps or extra parts. You can remove your old fairings and install the new fairings right away. This saves you time and effort. You do not need to drill new holes or buy extra brackets. The swap is simple and direct.
Tip: Always check your fairing kit before you start. Make sure all the clips and bolts are included. This helps you finish the swap without delays.
You have many choices when you want to buy new fairings for your bike. Aftermarket companies offer injection-molded fairing kits for both the 2006 and 2007 models. These kits cost about $272.00 each. You can pick from many color schemes and graphic designs. Some popular options include:
All these kits fit both the 2006 and 2007 models. You do not need to worry about differences in fitment. The main difference between the kits is the color and graphics. You can choose a style that matches your taste. If you want your bike to look unique, you can pick a bold design or a classic color. The fairing kits make it easy for you to refresh your bike’s look.
Tip: Aftermarket fairings give you a chance to make your bike stand out. You can choose a design that fits your personality and riding style.
Swapping a 2007 fairing onto your 2006 cbr1000rr can feel simple if you follow the right steps. Start by removing your old fairings and keep all the bolts and clips in a safe place. Next, check the mounting points on your frame. The 2007 fairing should line up with these points. If you see any wiring or the ECU under the stabilizer, you may need to move it for a better fit. Many riders find that using the 2006 radiator and brackets makes the process easier. If you use a different radiator, you might need to trim some brackets or plastics. Take your time and check each part before tightening everything down. If you do not feel confident, ask a professional for help.
Tip: Lay out all your new fairing pieces before you start. This helps you spot missing parts and plan your work.
You can find parts for both the 2006 and 2007 models grouped together. This means you have a wide selection and easy access to what you need. Most suppliers do not separate the years, so you can shop with confidence. The table below shows the current price range for aftermarket fairing kits and accessories:
Item Description | Price Range (USD) | Notes |
---|---|---|
Full aftermarket fairing kits | $566.00 - $689.00 | Prices vary by supplier and design; not OEM but close quality with 180-day warranty. |
Seat Cowl | $19.99 | Optional add-on part. |
Bolt Kit | $29.99 | Optional add-on part. |
Tank Cover | $49.99 | Optional add-on part. |
Full set with all accessories (seat cowl, bolt kit, tank cover) | Approximately $665.97 | Total price when all accessories are included. |
You can see that a full set with all accessories costs about $665.97. Most kits come with a 180-day warranty for defects.
When you swap fairings, you may face a few common problems. Many riders mention that moving the ECU under the stabilizer can be tricky. If you use the original 2006 radiator and brackets, the swap goes smoother. Using a larger radiator from an older model may require you to trim some parts. Always plan ahead and have patience. Some mechanical skill helps, but the process stays manageable for most people.
Note: Aftermarket fairing kits fit both years without drilling. Use stock or new steel hardware for best results. If you are unsure, professional installation is a good choice.
You now know the 2007 and 2006 CBR1000RR models share most features, with only minor updates in color and swingarm finish. Swapping 2007 fairings onto a 2006 bike is straightforward. Many riders find the process easy and enjoy the visual upgrade.
You can refresh your bike’s look in 2025 with confidence and style.
Yes, you can use 2007 fairings on your 2006 CBR1000RR. The mounting points match. You do not need to drill or cut anything. The swap is direct.
You need basic hand tools. Use a Phillips screwdriver, a socket set, and some Allen wrenches. Keep a tray for bolts and clips. A soft cloth helps protect your paint.
Aftermarket fairings use ABS plastic, like OEM parts. Some kits may feel lighter. You get good strength for daily riding. For racing, OEM fairings may last longer.
No, the fairing swap does not change how your bike rides. The shape and weight stay the same. You get a new look, but the handling and speed do not change.
Tip: Check reviews before you buy. Look for sellers with good ratings.
Detailed 2025 Analysis Of The Kawasaki Ninja H2R
Top Custom Fairing Options For Honda CBR1000RR-R
2025’s Six Most Stylish Motorcycles For Beginner Riders
Advantages And Disadvantages Of Ducati Panigale V4 Fairings
Comprehensive Look At Kawasaki Ninja 650 Fairing Performance